资源类型

期刊论文 21

年份

2023 4

2022 4

2021 3

2020 3

2019 1

2018 3

2015 1

2012 1

2005 1

展开 ︾

关键词

双极板 2

膜电极 2

2035 1

8英寸 1

双稳态电润湿；非平面；控制电极；低电压；高对比度 1

开发现状 1

技术方向 1

氢燃料电池 1

氢能 1

沟槽栅 1

燃料电池 1

电催化剂 1

系统部件 1

绝缘栅双极型晶体管 (IGBT) 1

质子交换膜 1

轨道交通 1

高功率密度 1

展开 ︾

检索范围：

排序： 展示方式：

Performance of activated carbon coated graphite bipolar electrodes on capacitive deionization method

Hossein D. Atoufi, Hasti Hasheminejad, David J. Lampert

《环境科学与工程前沿（英文）》 2020年 第14卷 第6期 doi: 10.1007/s11783-020-1278-1

摘要： Abstract • Graphite bipolar electrodes act as an appropriate bed for the CDI process. • Activated carbon Coating improves the application of the electrodes. • CDI is an environmentally friendly method to apply for brackish water. • Initial concentration is the most important parameter in the CDI method. • CDI process in a batch-mode setup needs more development. This research investigates a capacitive deionization method for salinity reduction in a batch reactor as a new approach for desalination. Reductions of cost and energy compared with conventional desalination methods are the significant advantages of this approach. In this research, experiments were performed with a pair of graphite bipolar electrodes that were coated with a one-gram activated carbon solution. After completing preliminary tests, the impacts of four parameters on electrical conductivity reduction, including (1) the initial concentration of feed solution, (2) the duration of the tests, (3) the applied voltage, and (4) the pH of the solution, were examined. The results show that the maximum efficiency of electrical conductivity reduction in this laboratory-scale reactor is about 55%. Furthermore, the effects of the initial concentration of feed solution are more significant than the other parameters. Thus, using the capacitive deionization method for water desalination with low and moderate salt concentrations (i.e., brackish water) is proposed as an affordable method. Compared with conventional desalination methods, capacitive deionization is not only more efficient but also potentially more environmentally friendly.

关键词： Capacitive deionization (CDI)     Desalination     Electrical conductivity (EC)     Graphite bipolar electrode     Activated carbon coated (ACC)    

HTML PDF 收藏

mechanistic study on electrocoagulation process for municipal wastewater treatment based on horizontal bipolarelectrodes

Zhenlian Qi, Shijie You, Ranbin Liu, C. Joon Chuah

《环境科学与工程前沿（英文）》 2020年 第14卷 第3期 doi: 10.1007/s11783-020-1215-3

摘要： EC modified with BPEs enhances pollutant removal and reduce energy consumption. Increasing BPE number cannot increase flocculants yield exponentially. Simulations help to predict the distribution of electrochemical reactions on BPEs. The design of electrodes is crucial to electrocoagulation process (EC), specifically, with respect to pollutant removal and energy consumption. During EC, the mechanisms for interaction between different electrode arrangement and electrode reactions remain unclear. This work presents an integrated EC process based on horizontal bipolar electrodes (BPEs). In the electrochemical cell, the graphite plates are used as driving cathode while either Fe or Al plates serves as driving anode and BPEs. The BPEs are placed horizontally between the driving electrodes. For municipal wastewater treatment, the pollutant removal efficiency and energy consumption in different configurations of two-dimension electrocoagulation (2D-EC) system with horizontal BPEs were investigated. The removal efficiency of turbidity, total phosphorus and total organic carbon increased significantly with the number of BPEs. Noted that the energy consumption for TP removal decreased by 75.2% with Fe driving anode and 81.5% with Al driving anode than those of 2D-EC, respectively. In addition, the physical field simulation suggested the distributions of potential and current in electrolyte and that of induced charge density on BPE surface. This work provides a visual theoretical guidance to predict the distribution of reactions on BPEs for enhanced pollutant removal and energy saving based on electrocoagulation process for municipal wastewater treatment.

关键词： Electrocoagulation     Bipolar electrodes     Municipal wastewater     Simulations    

HTML PDF 收藏

The treatment of black-odorous water using tower bipolar electro-flocculation including the removal of

Huan He, Qinjin Yu, Chaochao Lai, Chen Zhang, Muhan Liu, Bin Huang, Hongping Pu, Xuejun Pan

《环境科学与工程前沿（英文）》 2021年 第15卷 第2期 doi: 10.1007/s11783-020-1310-5

摘要： Abstract • An innovative bubble column tower BPE was designed to treat the black-odorous water. • PO43−, S2− and turbidity were removed, and dissolved oxygen was enriched in the BPE. • An aluminum bipolar electrode gave the best oxygen enrichment and pollutant removal. • Changes of microorganisms confirmed the improvement in water quality achieved. The large amount of municipal wastewater discharged into urban rivers sometimes exceeds the rivers’ self-purification capacity leading to black-odorous polluted water. Electro-flocculation has emerged as a powerful remediation technology. Electro-flocculation in a bubble column tower with a bipolar electrode (BPE) was tested in an attempt to overcome the high resistance and weak gas-floatation observed with a monopolar electrode (MPE) in treating such water. The BPE reactor tested had a Ti/Ta2O5-IrO2 anode and a graphite cathode with an iron or aluminum bipolar electrode suspended between them. It was tested for its ability to reduce turbidity, phosphate and sulphion and to increase the concentration of dissolved oxygen. The inclusion of the bipolar electrode was found to distinctly improved the system’s conductivity. The system’s electro-flocculation and electrical floatation removed turbidity, phosphate and sulphion completely, and the dissolved oxygen level improved from 0.29 to 6.28 mg/L. An aluminum bipolar electrode performed better than an iron one. Changes in the structure of the microbial community confirmed a significant improvement in water quality.

关键词： Black-odorous water     Bipolar electrodes     Flocculation     Floatation     Oxygen enrichment     Turbidity    

HTML PDF 收藏

Review on cellulose paper-based electrodes for sustainable batteries with high energy densities

《化学科学与工程前沿（英文）》 2023年 第17卷 第8期   页码 1010-1027 doi: 10.1007/s11705-023-2307-y

摘要： Powering the future, while maintaining strong socioeconomic growth and a cleaner environment, is going to be one of the biggest challenges faced by mankind nowadays. Thus, there is a transition from the use of fossil fuels to renewable energy sources. Cellulose, the main component of paper, represents a unique type of bio-based building blocks featuring exciting properties: low-cost, hierarchical fibrous structures, hydrophilicity, biocompatible, mechanical flexibility, and renewability, which make it perfect for use in paper-based sustainable energy storage devices. This review focuses on lithium-ion battery application of celluloses with cellulose at different scales, i.e., cellulose microfibers, and nanocellulose, and highlights the new trends in the field. Recent advances and approaches to construct high mass loading paper electrodes toward high energy density batteries are evaluated and the limitations of paper-based cathodes are discussed. This will stimulate the use of natural resources and thereby the development of renewable electric energy systems based on sustainable technologies with low environmental impacts and carbon footprints.

关键词： cellulose     paper electrodes     Li-ion batteries     high energy density    

HTML PDF 收藏

Cutting performance of surgical electrodes by constructing bionic microstriped structures

《机械工程前沿（英文）》 2023年 第18卷 第1期 doi: 10.1007/s11465-022-0728-9

摘要： Surgical electrodes rely on thermal effect of high-frequency current and are a widely used medical tool for cutting and coagulating biological tissue. However, tissue adhesion on the electrode surface and thermal injury to adjacent tissue are serious problems in surgery that can affect cutting performance. A bionic microstriped structure mimicking a banana leaf was constructed on the electrode via nanosecond laser surface texturing, followed by silanization treatment, to enhance lyophobicity. The effect of initial, simple grid-textured, and bionic electrodes with different wettabilities on tissue adhesion and thermal injury were investigated using horizontal and vertical cutting modes. Results showed that the bionic electrode with high lyophobicity can effectively reduce tissue adhesion mass and thermal injury depth/area compared with the initial electrode. The formation mechanism of adhered tissue was discussed in terms of morphological features, and the potential mechanism for antiadhesion and heat dissipation of the bionic electrode was revealed. Furthermore, we evaluated the influence of groove depth on tissue adhesion and thermal injury and then verified the antiadhesion stability of the bionic electrode. This study demonstrates a promising approach for improving the cutting performance of surgical electrodes.

关键词： surgical electrodes     tissue adhesion     thermal injury     bionic structures     cutting performance     medical tools    

HTML PDF 收藏

Effect of placement angles on wireless electrocoagulation for bipolar aluminum electrodes

Zhenlian Qi, Jinna Zhang, Shijie You

《环境科学与工程前沿（英文）》 2018年 第12卷 第3期 doi: 10.1007/s11783-018-1034-y

摘要： We in our previous study reported the wireless electrocoagulation (WEC) based on bipolar electrochemistry for water purification. One of the most important advantages of WEC is the omission of ohmic connection between bipolar electrode (BPE) and power supply, and thus the electrochemical reactions on BPE are driven by electric field in solution induced by driving electrodes. In this study, the impact of placement angle of bipolar aluminum electrode on WEC was investigated to provide a detailed analysis on the correlations between the bipolar electrode placement angle and bipolar electrocoagulation reactions. The results showed that the WEC cell with a horizontal BPE placed at 0° produced the maximum dissolved aluminum coagulant, accounting for 71.6 % higher than that with a vertical one placed at 90°. Moreover, the finite element simulations of current and potential distribution were carried out along the surface of BPE at different placement angles, revealing the mechanism of different BPE placement angles on aluminum dissolution rates in WEC system.

关键词： Bipolar electrochemistry     Wireless electrocoagulation     Placement angle    

HTML PDF 收藏

Hollow-fiber gas penetration electrodes efficiently produce renewable synthetic fuels

《能源前沿（英文）》 2022年 第16卷 第5期   页码 700-705 doi: 10.1007/s11708-022-0842-8

HTML PDF 收藏

Multistage-batch bipolar membrane electrodialysis for base production from high-salinity wastewater

《化学科学与工程前沿（英文）》 2022年 第16卷 第5期   页码 764-773 doi: 10.1007/s11705-021-2114-2

摘要： Bipolar membrane electrodialysis (BMED) is considered a state-of-the-art technology for the conversion of salts into acids and bases. However, the low concentration of base generated from a traditional BMED process may limit the viability of this technology for a large-scale application. Herein, we report an especially designed multistage-batch (two/three-stage-batch) BMED process to increase the base concentration by adjusting different volume ratios in the acid (Vacid), base (Vbase), and salt compartments (Vsalt). The findings indicated that performance of the two-stage-batch with a volume ratio of Vacid:Vbase:Vsalt = 1:1:5 was superior in comparison to the three-stage-batch with a volume ratio of Vacid:Vbase:Vsalt = 1:1:2. Besides, the base concentration could be further increased by exchanging the acid produced in the acid compartment with fresh water in the second stage-batch process. With the two-stage-batch BMED, the maximum concentration of the base can be obtained up to 3.40 mol∙L–1, which was higher than the most reported base production by BMED. The low energy consumption and high current efficiency further authenticate that the designed process is reliable, cost-effective, and more productive to convert saline water into valuable industrial commodities.

关键词： bipolar membrane electrodialysis     multistage-batch     base production     high-salinity wastewater    

HTML PDF 收藏

Ultrafast-laser-treated poly(3,4-ethylenedioxythiophene): poly(styrenesulfonate) electrodes with enhanced

《化学科学与工程前沿（英文）》 2023年 第17卷 第2期   页码 206-216 doi: 10.1007/s11705-022-2203-x

摘要： Poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) is an important organic electrode for solution-processed low-cost electronic devices. However, it requires doping and post-solvent treatment to improve its conductivity, and the chemicals used for such treatments may affect the device fabrication process. In this study, we developed a novel route for exploiting ultrafast lasers (femtosecond and picosecond laser) to simultaneously enhance the conductivity and transparency of PEDOT:PSS films and fabricate patterned solution-processed electrodes for electronic devices. The conductivity of the PEDOT:PSS film was improved by three orders of magnitude (from 3.1 to 1024 S·cm–1), and high transparency of up to 88.5% (average visible transmittance, AVT) was achieved. Raman and depth-profiling X-ray photoelectron spectroscopy revealed that the oxidation level of PEDOT was enhanced, thereby increasing the carrier concentration. The surface PSS content also decreased, which is beneficial to the carrier mobility, resulting in significantly enhanced electrical conductivity. Further, we fabricated semitransparent perovskite solar cells using the as-made PEDOT:PSS as the transparent top electrodes, and a power conversion efficiency of 7.39% was achieved with 22.63% AVT. Thus, the proposed route for synthesizing conductive and transparent electrodes is promising for vacuum and doping-free electronics.

关键词： PEDOT:PSS     ultrafast laser     transparent electrode     ST-PSCs     patterning    

HTML PDF 收藏

Efficient photoelectrochemical oxidation of rhodamine B on metal electrodes without photocatalyst or

Xuejiao Wang, Xiang Feng, Jing Shang

《环境科学与工程前沿（英文）》 2018年 第12卷 第6期 doi: 10.1007/s11783-018-1061-8

摘要：

•The efficient PEC degradation of RhB is realized using no photocatalyst.

•The efficient PEC degradation of RhB features the low salinity.

•The PEC degradation of RhB takes place on the anode and cathode simultaneously.

关键词： Energy relay structure     Energy saving     Photocatalyst-free and low-salinity degradation     Photoelectrochemical cell    

HTML PDF 收藏

Electrospun porous carbon nanofibers derived from bio-based phenolic resins as free-standing electrodes

《化学科学与工程前沿（英文）》 2023年 第17卷 第5期   页码 504-515 doi: 10.1007/s11705-022-2260-1

摘要： Phenolic resins were employed to prepare electrospun porous carbon nanofibers with a high specific surface area as free-standing electrodes for high-performance supercapacitors. However, the sustainable development of conventional phenolic resin has been challenged by petroleum-based phenol and formaldehyde. Lignin with abundant phenolic hydroxyl groups is the main non-petroleum resource that can provide renewable aromatic compounds. Hence, lignin, phenol, and furfural were used to synthesize bio-based phenolic resins, and the activated carbon nanofibers were obtained by electrospinning and one-step carbonization activation. Fourier transform infrared and differential scanning calorimetry were used to characterize the structural and thermal properties. The results reveal that the apparent activation energy of the curing reaction is 89.21 kJ·mol–1 and the reaction order is 0.78. The activated carbon nanofibers show a uniform diameter, specific surface area up to 1100 m2·g–1, and total pore volume of 0.62 cm3·g–1. The electrode demonstrates a specific capacitance of 238 F·g–1 (0.1 A·g–1) and good rate capability. The symmetric supercapacitor yields a high energy density of 26.39 W·h·kg–1 at 100 W·kg–1 and an excellent capacitance retention of 98% after 10000 cycles. These results confirm that the activated carbon nanofiber from bio-based phenolic resins can be applied as electrode material for high-performance supercapacitors.

关键词： lignin     bio-based phenolic resins     electrospinning     activated carbon nanofibers     supercapacitors    

HTML PDF 收藏

Self-supported transition metal phosphide based electrodes as high-efficient water splitting cathodes

Yan Zhang, Jian Xiao, Qiying Lv, Shuai Wang

《化学科学与工程前沿（英文）》 2018年 第12卷 第3期   页码 494-508 doi: 10.1007/s11705-018-1732-9

摘要：

Electrolytic water splitting has been considered as a promising technology to produce highly pure H2 by using electrical power produced from wind, solar energy or other fitful renewable energy resources. Combining novel self-supporting structure and high-performance transition metal phosphides (TMP) shows substantial promise for practical application in water splitting. In this review, we try to provide a comprehensive analysis of the design and fabrication of various self-supported TMP electrodes for hydrogen evolution reaction, which are divided into three categories: catalysts growing on carbon-based substrates, catalysts growing on metal-based substrates and freestanding catalyst films. The material structures together with catalytic performances of self-supported electrodes are presented and discussed. We also show the specific strategies to further improve the catalytic performance by elemental doping or incorporation of nanocarbons. The simple and one-step methods to fabricate self-supported TMP electrodes are also highlighted. Finally, the challenges and perspectives for self-supported TMP electrodes in water splitting application are briefly discussed.

关键词： transition metal phosphide     self-supported electrode     electrocatalysis     hydrogen evolution reaction    

HTML PDF 收藏

phosphonate-derived cobalt/nickel phosphide@N-doped carbon hybrids as efficient bifunctional oxygen electrodes

《化学科学与工程前沿（英文）》 2022年 第16卷 第9期   页码 1367-1376 doi: 10.1007/s11705-022-2153-3

摘要： The exploration of efficient bifunctional electrocatalysts for oxygen reduction reaction and oxygen evolution reaction is pivotal for the development of rechargeable metal–air batteries. Transition metal phosphides are emerging as promising catalyst candidates because of their superb activity and low cost. Herein, a novel metal phosphonate-derived cobalt/nickel phosphide@N-doped carbon hybrid was developed by a carbothermal reduction of cobalt/nickel phosphonate hybrids with different Co/Ni molar ratios. The metal phosphonate derivation method achieved an intimately coupled interaction between metal phosphides and a heteroatom-doped carbon substrate. The resultant Co2P/Ni3P@NC-0.2 enables an impressive electrocatalytic oxygen reduction reaction activity, comparable with those of state-of-the-art Pt/C catalysts in terms of onset potential (0.88 V), 4e‒ selectivity, methanol tolerance, and long-term durability. Moreover, remarkable oxygen evolution reaction activity was also observed in alkaline conditions. The high activity is ascribed to the N-doping, abundant accessible catalytic active sites, and the synergistic effect among the components. This work not only describes a high-efficiency electrocatalyst for both oxygen reduction reaction and oxygen evolution reaction, but also highlights the application of metal phosphonate hybrids in fabricating metal phosphides with tunable structures, which is of great significance in the energy conversion field.

关键词： metal phosphonate     cobalt/nickel phosphide     N-doped carbon     oxygen electrochemistry     Zn−air battery    

HTML PDF 收藏

非平面电极双稳态电润湿显示器件研究 Regular Papers-Research Articles

Han ZHANG, Xue-lei LIANG

《信息与电子工程前沿（英文）》 2019年 第20卷 第9期   页码 1289-1295 doi: 10.1631/FITEE.1800167

摘要： 双稳态电润湿显示器仅在状态切换时耗能，在状态稳定时无耗能，是一种非常有潜力的低能耗电子纸显示技术。本文设计和实现了通过常规光刻工艺制备一种非平面电极结构的双稳态电润湿器件。该器件不仅具备视频响应速度，而且有潜力实现可控的像素灰阶。与现有平面电极结构双稳态电润湿器件相比，该新型电极结构可实现更低驱动电压和更高对比度。

关键词： 双稳态电润湿；非平面；控制电极；低电压；高对比度    

HTML PDF 收藏

Cross-stacked super-aligned carbon nanotube/activated carbon composite electrodes for efficient water

Min Li, Shuai Liang, Yang Wu, Meiyue Yang, Xia Huang

《环境科学与工程前沿（英文）》 2020年 第14卷 第6期 doi: 10.1007/s11783-020-1286-1

摘要： Abstract • A high-performance electrode was prepared with super-aligned carbon nanotubes. • SACNT/AC electrode achieved a ~100% increase in desalination capacity and rate. • SACNT/AC electrode achieved a ~26% increase in charge efficiency. • CUF process with SACNT/AC achieved an up to 2.43-fold fouling reduction. • SACNT/AC imparts overall improved water purification efficiency. The practical application of the capacitive deionization (CDI) enhanced ultrafiltration (CUF) technology is hampered due to low performance of electrodes. The current study demonstrated a novel super-aligned carbon nanotube (SACNT)/activated carbon (AC) composite electrode, which was prepared through coating AC on a cross-stacked SACNT film. The desalination capability and water purification performance of the prepared electrode were systematically investigated at different applied voltages (0.8–1.2 V) with a CDI system and a CUF system, respectively. In the CDI tests, as compared with the control AC electrode, the SACNT/AC electrode achieved an approximately 100% increase in both maximum salt adsorption capacity and average salt adsorption rate under all the applied voltage conditions, demonstrating a superior desalination capability. Meanwhile, a conspicuous increase by an average of ~26% in charge efficiency was also achieved at all the voltages. In the CUF tests, as compared with the control run at 0 V, the treatment runs at 0.8, 1.0, and 1.2 V achieved a 2.40-fold, 2.08-fold, and 2.43-fold reduction in membrane fouling (calculated according to the final transmembrane pressure (TMP) data at the end of every purification stage), respectively. The average TMP increasing rates at 0.8, 1.0, and 1.2 V were also roughly two times smaller than that at 0 V, indicating a dramatical reduction of membrane fouling. The SACNT/AC electrode also maintained its superior desalination capability in the CUF process, resulting in an overall improved water purification efficiency.

关键词： Carbon nanotube     Super aligned     Conductive membrane     Capacitive deionization     Ultrafiltration     Desalination    

HTML PDF 收藏

标题 作者 时间 类型 操作

Performance of activated carbon coated graphite bipolar electrodes on capacitive deionization method

Hossein D. Atoufi, Hasti Hasheminejad, David J. Lampert

期刊论文

mechanistic study on electrocoagulation process for municipal wastewater treatment based on horizontal bipolarelectrodes

Zhenlian Qi, Shijie You, Ranbin Liu, C. Joon Chuah

期刊论文

The treatment of black-odorous water using tower bipolar electro-flocculation including the removal of

Huan He, Qinjin Yu, Chaochao Lai, Chen Zhang, Muhan Liu, Bin Huang, Hongping Pu, Xuejun Pan

期刊论文

Review on cellulose paper-based electrodes for sustainable batteries with high energy densities

期刊论文

Cutting performance of surgical electrodes by constructing bionic microstriped structures

期刊论文

Effect of placement angles on wireless electrocoagulation for bipolar aluminum electrodes

Zhenlian Qi, Jinna Zhang, Shijie You

期刊论文

Hollow-fiber gas penetration electrodes efficiently produce renewable synthetic fuels

期刊论文

Multistage-batch bipolar membrane electrodialysis for base production from high-salinity wastewater

期刊论文

Ultrafast-laser-treated poly(3,4-ethylenedioxythiophene): poly(styrenesulfonate) electrodes with enhanced

期刊论文

Efficient photoelectrochemical oxidation of rhodamine B on metal electrodes without photocatalyst or

Xuejiao Wang, Xiang Feng, Jing Shang

期刊论文

Electrospun porous carbon nanofibers derived from bio-based phenolic resins as free-standing electrodes

期刊论文

Self-supported transition metal phosphide based electrodes as high-efficient water splitting cathodes

Yan Zhang, Jian Xiao, Qiying Lv, Shuai Wang

期刊论文

phosphonate-derived cobalt/nickel phosphide@N-doped carbon hybrids as efficient bifunctional oxygen electrodes

期刊论文

非平面电极双稳态电润湿显示器件研究

Han ZHANG, Xue-lei LIANG

期刊论文

Cross-stacked super-aligned carbon nanotube/activated carbon composite electrodes for efficient water

Min Li, Shuai Liang, Yang Wu, Meiyue Yang, Xia Huang

期刊论文